Spray Primer Filler 400 ml
What is a spray rig?
Spray filler , also known as filler primer or spray filler , is a type of high-density primer used to level, fill imperfections, and improve paint adhesion on various surfaces. Its thick formula allows it to cover scratches, layer lines on 3D prints, and small irregularities in materials such as plastic, resin, metal, wood, and EVA foam.
In cosplay, spray primer is essential for preparing armor and props before final painting, ensuring a smooth and even surface. It's also used on 3D-printed PLA parts , facilitating post-processing by minimizing visible print lines and reducing the need for manual sanding.
Thanks to its filling and smoothing properties , it is a must-have product for those seeking professional finishes when creating props, miniatures, repairing cars or motorcycles and their helmets, as well as models and detailed pieces for any craft project.
Contents: 1x 400ml
How to use primer filler?
Surface Preparation: The surface must be clean, dry, and free of dust, grease, or debris. If it's smooth or glossy, lightly sand with fine sandpaper (400-600 grit) to improve adhesion.
Product Shaking: Shake the aerosol well for at least 2 minutes before use. Test on a disposable surface to check flow and texture.
Application Conditions: Use at temperatures between 10°C and 25°C and with humidity below 65%. Do not apply in windy, extremely cold, or humid conditions.
Application: Hold the can 15-20 cm away from the object to be primed. Apply in thin, even coats, using smooth, steady strokes. Wait 5-10 minutes between coats before reapplying.
Drying and Finish: Touch dry in 30 minutes. Complete drying time in 24 hours. For a more even finish, sand lightly before painting.
Cleaning: After use, invert the spray and press the valve for a few seconds to clean the nozzle.
WARNINGS:
Keep out of reach of children.
Keep away from heat sources, sparks, open flames or hot surfaces.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Keep the container tightly closed.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, consult a doctor.
What is a spray rig?
Spray filler , also known as filler primer or spray filler , is a type of high-density primer used to level, fill imperfections, and improve paint adhesion on various surfaces. Its thick formula allows it to cover scratches, layer lines on 3D prints, and small irregularities in materials such as plastic, resin, metal, wood, and EVA foam.
In cosplay, spray primer is essential for preparing armor and props before final painting, ensuring a smooth and even surface. It's also used on 3D-printed PLA parts , facilitating post-processing by minimizing visible print lines and reducing the need for manual sanding.
Thanks to its filling and smoothing properties , it is a must-have product for those seeking professional finishes when creating props, miniatures, repairing cars or motorcycles and their helmets, as well as models and detailed pieces for any craft project.
Contents: 1x 400ml
How to use primer filler?
Surface Preparation: The surface must be clean, dry, and free of dust, grease, or debris. If it's smooth or glossy, lightly sand with fine sandpaper (400-600 grit) to improve adhesion.
Product Shaking: Shake the aerosol well for at least 2 minutes before use. Test on a disposable surface to check flow and texture.
Application Conditions: Use at temperatures between 10°C and 25°C and with humidity below 65%. Do not apply in windy, extremely cold, or humid conditions.
Application: Hold the can 15-20 cm away from the object to be primed. Apply in thin, even coats, using smooth, steady strokes. Wait 5-10 minutes between coats before reapplying.
Drying and Finish: Touch dry in 30 minutes. Complete drying time in 24 hours. For a more even finish, sand lightly before painting.
Cleaning: After use, invert the spray and press the valve for a few seconds to clean the nozzle.
WARNINGS:
Keep out of reach of children.
Keep away from heat sources, sparks, open flames or hot surfaces.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Keep the container tightly closed.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, consult a doctor.
What is a spray rig?
Spray filler , also known as filler primer or spray filler , is a type of high-density primer used to level, fill imperfections, and improve paint adhesion on various surfaces. Its thick formula allows it to cover scratches, layer lines on 3D prints, and small irregularities in materials such as plastic, resin, metal, wood, and EVA foam.
In cosplay, spray primer is essential for preparing armor and props before final painting, ensuring a smooth and even surface. It's also used on 3D-printed PLA parts , facilitating post-processing by minimizing visible print lines and reducing the need for manual sanding.
Thanks to its filling and smoothing properties , it is a must-have product for those seeking professional finishes when creating props, miniatures, repairing cars or motorcycles and their helmets, as well as models and detailed pieces for any craft project.
Contents: 1x 400ml
How to use primer filler?
Surface Preparation: The surface must be clean, dry, and free of dust, grease, or debris. If it's smooth or glossy, lightly sand with fine sandpaper (400-600 grit) to improve adhesion.
Product Shaking: Shake the aerosol well for at least 2 minutes before use. Test on a disposable surface to check flow and texture.
Application Conditions: Use at temperatures between 10°C and 25°C and with humidity below 65%. Do not apply in windy, extremely cold, or humid conditions.
Application: Hold the can 15-20 cm away from the object to be primed. Apply in thin, even coats, using smooth, steady strokes. Wait 5-10 minutes between coats before reapplying.
Drying and Finish: Touch dry in 30 minutes. Complete drying time in 24 hours. For a more even finish, sand lightly before painting.
Cleaning: After use, invert the spray and press the valve for a few seconds to clean the nozzle.
WARNINGS:
Keep out of reach of children.
Keep away from heat sources, sparks, open flames or hot surfaces.
Do not spray on an open flame or other ignition source.
Do not pierce or burn, even after use.
Keep the container tightly closed.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Call a POISON CENTER or doctor: If eye irritation persists, consult a doctor.